Identification of potential biomarkers for diazinon exposure to Japanese Medaka (Oryzias latipes) using annealing control primers

A new differential display-polymerase chain reaction (PCR) method based on annealing control primers was used to screen and identify potential biomarkers from differentially expressed genes (DEGs) in medaka exposed to sub-lethal concentration of diazinon (100 ppb). Among the differentially expressed genes identified, the majority were in functional categories of protein biosynthesis, transport and metabolism according to the gene ontology classification. The differential expression of ribosomal protein genes was quantified by real time PCR. The genes encoding ribosomal proteins including L3 and S17 were selected as potential biomarkers for diazinon exposure in medaka fish.     

Use of physical properties to predict the effects of tillage practices on organic matter dynamics in three Illinois soils

This work builds on a previous study of long-term tillage trials that found use of no-tillage (NT) practices increased soil organic carbon (SOC) sequestration at Monmouth, IL (silt loam soil) by increasing the soil's protective capacity, but did not alter SOC storage in DeKalb, IL (silty clay loam), where higher clay contents provided a protective capacity not affected by tillage. The least limiting water range (LLWR), a multi-factor index of structural quality, predicted observed soil CO2 efflux patterns. Here we consider whether LLWR can predict sequestration trends at a third site, Perry, IL (silt loam soil) where SOC content is lower and bulk density is higher than in previously considered sites, and determine whether pore size characteristics can help explain the influence use of NT practices has had on SOC sequestration at all three locations. At Perry, LLWR was again related with differences in specific soil organic carbon mineralization rates (RESPsp) (2000-2001). Reduced RESPsp rates explain increases in SOC storage under NT management observed only after 17 yr. Trends in RESPsp suggest use of NT practices only enhance physical protection of SOC where soil bulk density is relatively high (approximately 1.4 g cm(-3)). In those soils (Monmouth and Perry), use of NT management reduced the volume of small macropores (15-150 microm) thought to be important for microbial activity. Physical properties appear to determine whether or not use of NT practices will enhance C storage by increasing physical protection of SOC. By refining the functions used to compute the LLWR and our understanding of the interactions between management, pore structure, and SOC mineralization, we should be able to predict the influence of tillage practices on SOC sequestration.     

Absorption characteristics of potassium carbonate-based solutions with rate promoters and corrosion inhibitors

In this research, absorbents for CO₂ capture were prepared by blending 30 wt% potassium carbonate, 3 wt% of a rate promoter, and 1 wt% of a corrosion inhibitor. Pipecolic acid, sarcosine, and diethanolamine were chosen as rate promoter candidates. Based on a rate promoter screening test for CO₂ loading capacity and absorption rate, pipecolic acid and sarcosine were selected to be used as rate promoters. 1,2,3-benzotriazole and ammonium thiocyanate were chosen as corrosion inhibitors, and they were mixed with a 30 wt% potassium carbonate-based absorbent mixture containing one of the rate promoters. The absorption rates for four absorbent solutions (30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% 1,2,3-benzotriazole, 30 wt% potassium carbonate?+?3 wt% pipecolic acid?+?1 wt% ammonium thiocyanate, 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% 1,2,3-benzotriazole, and 30 wt% potassium carbonate?+?3 wt% sarcosine?+?1 wt% ammonium thiocyanate) were measured, tabulated, and graphically displayed. These types of absorbents can be used for capturing CO₂ under high temperature and pressure conditions, such as those found in coal-fired power plants.     

Morphological variation of dinoflagellate Prorocentrum lima (Ehrenberg) Dodge with geographical difference

Prorocentrum lima (Ehrenberg) Dodge, one of the cosmopolitan dinoflagellates, is basically benthic and is found on the surface of macroalgae and detritus. The identification of this species requires detailed morphological observation because of its close similarity to other benthic Prorocentrum species. The purpose of this study is to detect the morphological variability of P. lima using culture clones collected from several areas to find an adequate way of subdividing the species. In this study, 33 clones of P. lima were collected from Saipan, Tahiti, Indonesia, Japan and Bermuda, and their thecal valves and periflagellar area were observed by means of light microscopy with differential interference contrast optics and scanning electron microscopy. In general cells have two centrally located pyrenoids and a posterior nucleus. The surface of both valves has many valve pores except the center. Evenly spaced marginal pores are located along the edge of the valves. P. lima samples studied herein were subdivided into four major types (ellipsoidal, general, short, and elongate ovoid) according to their shapes, length-to-width ratio and number of valve pores. The length-to-width ratios of ellipsoidal, general, short, and elongate ovoid types were 1.32, 1.33-1.43, 1.20-1.27, and 1.53-1.60 microm respectively. Also there were slight differences in the number of valve pores. The number of valve pores examined in this study ranges from 40 to 97: ellipsoidal, general, and short ovoid types range from 40 to 91, while an elongate ovoid type ranges from 80 to 97. The combination of valve shape, number of valve pores and length-to-width ratio provides useful information on the morphological variation of P. lima.     

Kinetics of chemical decolorization of the azo dye C.I. Reactive Orange 96 by sulfide

The mechanism of decolorization of azo dyes based on the extracellular chemical reduction with sulfide (H2S, HS-, S2-) was postulated for sulfate reducing environments. To design technical decolorization processes of textile wastewater treatment with sulfide produced by sulfate reducing bacteria (SRB), kinetics is of great significance. Batch experiments were made in order to investigate the kinetics of abiotic decolorization of the reactive mono-azo dye C.I. Reactive Orange 96 (RO 96) with sulfide, with varying pH. The decolorization of RO 96 by sulfide under the exclusion of O2 corresponded to first-order kinetics with respect to both dye and sulfide concentration. The decolorization of RO 96 with sulfide at neutral pH (7.1) was advantageous compared with that at pH for 4.1, 6.3, and 6.5. This is attributed to an increase in the fraction of HS- of total sulfide species at neutral pH. The rate constants k for the decolorization at 37 degrees C were obtained as 0.01 for pH = 4.1, 0.06 for pH = 6.3, 0.08 for pH = 6.5, and 0.09 for pH = 7.1 in mM(-1) min(-1). The high rate constants for sulfide at pH 6.5-7.1 support that the decolorization through SRB (i.e. by bio-sulfide) can be effective in anaerobic bacterial systems with sulfate.     

Effects of land use change and water reuse options on urban water cycle

The aim of this article was to study the effects of land use change and water reuse options on an urban water cycle. A water cycle analysis was performed on the Goonja drainage basin, located in metropolitan Seoul, using the Aquacycle model. The chronological e ects of urbanization were first assessed for the land uses of the Goonja drainage basin from 1975 to 2005, where the ratio of impervious areas ranged from 43% to 84%. Progressive urbanization was identified as leading to a decrease in evapotranspiration (29%), an increase in surface runo (41%) and a decrease in groundwater recharge (74%), indicating a serious distortion of the water cycle. From a subsequent analysis of the water reuse options, such as rainwater use and wastewater reuse, it is concluded that wastewater reuse seemed to have an advantage over rainwater use for providing a consistent water supply throughout the year for a country like Korea, where the rainy season is concentrated during the summer monsoon.     

Recycling of cathode ray tube panel glasses as aggregates of concrete blocks and clay bricks

While the cathode ray tube (CRT) funnel containing lead could be transported to a smelting facility to recover lead, which could be an available option in domestic, a proper technology to recycle a CRT panel must be developed. Thus, it was suggested that CRT panel glass be used as aggregates of concrete blocks and clay bricks. Samples of blocks and bricks were fabricated with CRT powders and tested to measure their strength and absorption rate to determine their qualities, and environmental soundness was determined by measuring the leaching rate of hazardous metals. For concrete blocks, CRT panel glass powders incorporated as aggregates up to 40 % replacing stone powder was proposed as the proper condition for manufacturing blocks. Around 2 % of CRT panel incorporated into clay brick to substitute Kaoline was suggested to fabricate the best quality of clay brick. Results of leaching test met the criteria with much less concentration of hazardous metals, even lead compound containing in the CRT funnel. To conclude, the use of CRT panel powder after crushing it to the proper size as an aggregate of concrete blocks or clay bricks could be one of the appropriate alternatives to recycle for CRT glass waste being generated drastically in a short term.     

Selective recovery of Cu, Zn, and Ni from acid mine drainage

In Korea, the heavy metal pollution from about 1,000 abandoned mines has been a serious environmental issue. Especially, the surface waters, groundwaters, and soils around mines have been contaminated by heavy metals originating from acid mine drainage (AMD) and mine tailings. So far, AMD was considered as a waste stream to be treated to prevent environmental pollutions; however, the stream contains mainly Fe and Al and valuable metals such as Ni, Zn, and Cu. In this study, Visual MINTEQ simulation was carried out to investigate the speciation of heavy metals as functions of pH and neutralizing agents. Based on the simulation, selective pH values were determined to form hydroxide or carbonate precipitates of Cu, Zn, and Ni. Experiments based on the simulation results show that the recovery yield of Zn and Cu were 91 and 94 %, respectively, in a binary mixture of Cu and Zn, while 95 % of Cu and 94 % of Ni were recovered in a binary mixture of Cu and Ni. However, the recovery yield and purity of Zn and Ni were very low because of similar characteristics of Zn and Ni. Therefore, the mixture of Cu and Zn or Cu and Ni could be recovered by selective precipitation via pH adjustment; however, it is impossible to recover selectively Zn and Ni in the mixture of them.     

Utility estimates of job performance as related to the Data,People, and Things parameters of work

The purpose of this study was to investigate the applicability of the Schmidt–Hunter global estimation method of assessing utility across a broad range of jobs. Ninety-five industrial/organizational psychologists estimated the utility of performance in 24 carefully selected jobs. The utility estimates were compared to the Data, People, and Things worker function parameters from the Dictionary of Occupational Titles. The majority of jobs (62.5 per cent) produced significantly positively skewed distributions of dollar-valued job performance. The Data, People, and Things parameters accounted for 46 per cent of the variance in the non-symmetry of the utility distributions and 33 per cent of the variance in the inter-rater reliability of the utility estimates. The implications of the results were discussed for utility assessment, and explained from a decision theoretic perspective. © 1998 John Wiley & Sons, Ltd.     

Assessment of water quality monitoring for the optimal sensor placement in lake Yahuarcocha using pattern recognition techniques and geographical information systems

Pollution and the eutrophication process are increasing in lake Yahuarcocha and constant water quality monitoring is essential for a better understanding of the patterns occurring in this ecosystem. In this study, key sensor locations were determined using spatial and temporal analyses combined with geographical information systems (GIS) to assess the influence of weather features, anthropogenic activities, and other non-point pollution sources. A water quality monitoring network was established to obtain data on 14 physicochemical and microbiological parameters at each of seven sample sites over a period of 13 months. A spatial and temporal statistical approach using pattern recognition techniques, such as cluster analysis (CA) and discriminant analysis (DA), was employed to classify and identify the most important water quality parameters in the lake. The original monitoring network was reduced to four optimal sensor locations based on a fuzzy overlay of the interpolations of concentration variations of the most important parameters.